Search results

A 7/16-14 (coarse) tap will follow the 10mm thread remains right in there. Keeping it straight is the hardest part. You'll probably have to drill the starter too. If you can, start with a taper tap then finish with bottoming tap. If you need to drill for the 7/16-14 it's a letter U drill. (.3680")

Charging us for their fk up. I heard the top brass or whatever they are, kept it under wraps until they could sell of shares. So are we supposed to say thanks? (to the credit agencies, not shooting you Jay, lol)

What's left, JC, Exide, East Penn? Heard lead mines are shut down entirely, whatever lead that is in circulation is.. 'it'. I dunno? Battery core prices are up to like 25 bucks now.

She is a clean ol rig. Nice to see a good honest truck.

Excellent. Been seeing that on the local news. Folks are getting trucks loaded and headed to Texas. A lot of times a collection of supplies is started to fill a straight truck and they end up needing 2 or 3 semi trucks. I hope each state can lend a hand. Also seeing able bodies on the way too...

The solenoid swings an arm that pushes a wire spring that spins a pilot valve in a bore to open/close main fuel flow. There is also a very fine screen in the cone on the front of the IP that could plug, tho that's rare. Screen: .

Trans could use a shot in the arm, TH700R4 probably. Good lil gearbox IMO, lots of upgrades for these.

All time biggest rainfall event on record they're saying.. Unreal. Hopefully it'll start draining off now with some very welcome sunshine or at least dry weather.

I heard folks are coming together and helping out their fellow man. Even taking in families that are complete strangers. It's the goodness in humanity that shines. It's what makes complete strangers, well, family.

Oh it ain't over yet, wait until folks call their insurance companies, those lowlifes try any way possible to avoid covering even the basics let alone valuables.

Wow Leroy and DJ just might be flooded out. It's looking real bad in Houston. I can't recall what suburb they're in. League City I think for Leroy. Dunno really

There is a 95 Peterbilt with a 3406C left in the fleet at work, and to this day will break the same injector line every 20k miles. The mechanics (parts changer types) looked at me like I had six heads when I told them to fasten the hard lines like CAT had it from the factory and they wouldn't...

Forecasting huge amounts of rain for you guys. Stay safe as possible.

Might be a resistor pack or a melted plug there on the hi only front ac. Other than that sounds like a good outing. I haven't even tried fly fishing yet. Need to.

Improper torque can cause warpage too. Especially the 'slip on' rotors. Being drilled, they can plug up and holes will rust shut. Rust is powerful and can displace any metal. Not to mention saw off your pads in record time. Sticking calipers and collapsed hoses will give you fits as well.

I can believe the Volvo asshat thing, but does carb really act on somebodies whim like that?

I think you can just block off the EGR and plug the vacuum line. Is your vacuum pump bad?

Rad radiator :cool:

The 'Introductions' thread would be a good place, or maybe '6.5 performance' thread. It will help you get noticed and out of this wiring thread.

Hmm, that might be worth it's own thread. Sounds like a neat rig!