Search results

Does anybody know which direction of move does + or - ?? I was already tired before I installed the new OS. Actually throttle is not that bad. Not having a turbo sux!

I have 10mm3 of fuel at 700rpm. So to fix this I have to move the eye ball(OS)? I don't see a way to do this on GMTD Scan. Is relearning the TDC resetting the pump?

I am not sure how to do that. I will play with it tonight. Thanks!

Do you still have this?

That is why I did the TDCO relearn using the GMTD Scan. It is running better, just got to figure out why the turbo is not working.

ok, the pmd was bad. I installed my spare and got rid of the other codes. I moved the pump, it was way off. I aligned it with two marks already scribed in to both sides of the pump. After that I got it set almost TDC perfect! The spare FSO I had was bad. The one in the pump is good. Now I...

I did change os. I did not change fso. Would that cause my issues/codes?

OS? FSO? What are you asking? I did nothing with the pump. All I did was follow the instructions that GMTD Scan has on there website under FAQ.

On too the next issue. I got all codes cleared. But, I now have new ones. I have; 56 - injection pump calibration resistor error 88 - TDC offset error I attempted a TDC relearn using GMTD scan. After following the instructions I got. desired 8.6 - actual 8.7 - TDC 0 Then relearn and it...

Moved the ground to a intake manifold bolt. I replaced the eye ball inside the pump. I lost all the codes that go with it. But, the coolant temp switch is bad. Will have to replace it before I can relearn TDC. I am slowly knocking out the issues.

I don't see it listed. What thermostat housing do you have, if any? Thanks!

Welcome to the Truck Stop!

Thanks AK!

Thanks! I will try the starter brace bolt. I agree the oil drain is covered in oil and is being leaked on constantly.

I have no idea where it goes. I do know that I don't like where it is know.

Can someone explain exactly where the passenger side ground cable goes from the battery. Mine is connected to one of the turbo drain bolts on the block. I feel this might be causing some of my issues. explanations would be great! A picture would be awesome!!!!!!! Thanks,

If AK don't take it. I will.

I wonder if you are taking about the same one that is in my truck. I will say my brakes work pretty good.

All I got to say. I wish I still had my 93!

That is exactly what I have been doing since I got this truck.