Search results

Wish I could get diesel for $3.69!

Yes they do! I have a Derale pan that holds an extra 2.5 qt.

I've always told myself that age is just a number, but as I near 50, my body is telling me otherwise! Hurts when I get up, hurts when I lay down, and stiff in all the wrong places in between!

If you can change the numbers to get my 93 to lock the tcc in 2nd gear, you can have my 6.5 upgrade fund for this winter!

Might be a little high of a stall for me. Rear tires probably wouldn't like it!

Even with studs?! HX55 at 50psi?? :wideyed: Wow! I mean Ouch! I destroyed a 6.5 (bent rods) when I had catastrophic head gasket failure, but it didn't do that!

It's a Devil's Own system with a 14gph nozzle. I have had no trouble with it, however, I can't recommend them because they won't answer the phone anymore. I think the original owner may have passed away. This is a mechanical pump, no computer. There are many changes and adjustments that can be...

I was happy to be almost home after a long week! Hx35, stock but tuned 4911, water/meth 15%

Might be necessary to o-ring the block! My puny setup burns clean at about 12psi- unless I have the water on!

That is a lot of boost!

I was referencing exhaust flow in my post, I should have been more clear. My bad

Wow! Adjust your headrest properly to avoid whiplash. Nice work!

175cfm @.250" is huge. Can't wait to see what you feed and compress all that flow with!

Nice work! You could always lend it to me! I assure you that it will be broken in when I'm done with it!

Shoulda put a better converter in there while I was at it!

If your tranny mount is squashed, it may allow enough sag to lift the front of the engine. I replaced All the mounts before I installed my Optimizer, and had no clearance issues with the dmax fan.

Last load to go home from the 2021 Nittany Antique Machinery Association fall show. We get to play with old tractors for four days straight! I hate when it's over. 1950 John Deere B and a M&W P355 dynomometer.

Done correctly, a 6.5 can move serious weight without getting hot. I moved two loads today over a 6+% grade and never went over 195*. Now the climb is only about a mile and a half, but I pulled 15.5k on the first run, and 14k on the second one. Second gear at 3200rpm. Lots of water with a...

Don't do it, Man!!

Nice bike! I wish I knew where my Grandpa's suicide shift Harley was. He bought it after getting home from Germany in 1947.