Search results

When I had the 1989 C2500 and switched to Amsoil, I called their tech number and 5w30 heavy duty diesrl engine oil is what they recommended.. I put 300,000 miles on the first engine and 500,000 miles on the long block, 6.5 GM crate engine we replaced it with. We got 300,000 plus on all of our...

Balanced injectors. Checked, changed every 100,000 miles or more

Fluidampr, bypass filter. 5w30 Amsoil heavy duty diesel engine oil, engine oil cooler lines.. quality filters. Quality fuel. Lift pump relay upgrade with prime feature. Luck

Some place handy when your working on.it. On trucks, Suburbans I put it on the firewall right next to the underhood fuse box. On the older vehicles, I put it by the load center. On the right side. I'm not sure where I would put it on a motorhome. I use a safety toggle with the flip cover...

Install a toggle switch to run it whenever desired for diagnostics and priming

Lol just had a go round today aba piece of conduit. I've had it awhile. Haven't used it yet, so it's junk. That would also describe my ball joint press and a lot of other stuff

Same here. I have a lot of stuff to get rid of I've fought throwing away all of the gmt400 stuff. I haven't been able to advertise stuff that I can't move. Because the fuel tank needs swapped on the backhoe. Sheets of 10 ga. Diamond plate. Other stuff. I'm not up to getting ready for an...

What's the Reader's Digest Condensed version?

That's what I said about the sisters.

I would only use a GM or ACDELCO harness. There might be something better. But not that I've heard of

Where did the IP come from? Better off having the original rebuilt

Thank you very much

What's the status of the injection pump?

Could you give us a link to the relay with the built in diode? I always used 2 relays, because I never quite got the whole diode thing. Some people were installing diodes in the wire itself. I never knew what to buy or saw anything like an inline diode, similar to an inline fuse.

Does it have a snubber?

My wife said she might also be interested in.one of those 10" units

I agree. Except his lift pump is only putting out 5 psi, which may indicate the lift pump is not up to snuff, in which case it may take longer to get up to pressure. Back to things already discussed.

I'm not positive that is necessarily true. Pressure can be lost without introducing large amounts of air.

What's the known condition of the IP?

Those look good. This is what I used. http://www.fs2500filter.com/?gad_source=1&gclid=CjwKCAjwwLO_BhB2EiwAx2e-34HehvH5oG1z6KhQpEt7qvdULum1hciJ9u9MsPjEnSC1_6OA_uz0exoC6dsQAvD_BwE