• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

MrMarty51's latest activity

  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    After I got home from my sisters, truck had been running for over an hour, ambient temp about 100*F. The blower motor had been on high...
  • MrMarty51
    MrMarty51 reacted to jrsavoie's post in the thread Burning Main Fuses with Like Like.
    I've used that and similar products. Anything to keep the air from getting to things. If you don't have a super tight fit on connectors...
  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    The hose that currently was on the heater would in no way make connection with the heater motor. Tried in two different positions then...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Burning Main Fuses with Like Like.
    Next time your out near a pick n pull yard, look for most any 95-99 gmt400 it will have that rubber 90 deg hose. that is for air...
  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    Motor vent hose was not right, thought if it was shortened a little it might fit but nope, elbow to motor was too short. Left it off...
  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    Thank You a bunch. It is going back together. The new heater motor connection.
    • IMG_8040.jpeg
  • MrMarty51
    MrMarty51 reacted to ak diesel driver's post in the thread Burning Main Fuses with Like Like.
    Mine looks like the one on the right. And yes I use that oxgueard alot
  • MrMarty51
    MrMarty51 reacted to Twisted Steel Performance's post in the thread Burning Main Fuses with Like Like.
    I just replaced mine with a PM129 from autozone, it does blow harder than the old unit, how much I can't say but it feels stronger, and...
  • MrMarty51
    MrMarty51 reacted to nycxjeremyy's post in the thread How do you all get 6.2s to 300K miles with Like Like.
    Neither sir, The transmission in question was built by Gearstar Automotives. Yes, Gearstar and AAMCO are in communications, Gearstar...
  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    The configuration. Then hope it works.
    • IMG_8039.jpeg
  • MrMarty51
    MrMarty51 replied to the thread Burning Main Fuses.
    This is the only other thing that i have for corrosion and oxidation. I used this on the aluminum wire coming from the main pole into...
    • IMG_8037.jpeg
  • MrMarty51
    MrMarty51 replied to the thread My Shop.
    If ever I get to restoring that 78 MG-B I’ll be building a rotisserie for it too.
  • MrMarty51
    MrMarty51 reacted to n8in8or's post in the thread My Shop with Like Like.
    Lucky!! I’ve been wanting one for a few years now. Usually even $500 is cheap. Will you be using that for the pickup project with your...
  • MrMarty51
    MrMarty51 reacted to Twisted Steel Performance's post in the thread My Shop with Like Like.
    Rotisserie?
  • MrMarty51
    MrMarty51 reacted to ak diesel driver's post in the thread My Shop with Like Like.
    Picked this up on MP last night $180
Show older items
Back
Top