Bell housing bolts

[SnowDrift]

M10x1.5 -

Is this the correct thread size that would be found in a 2011 GEP block? It turns out the 3/8"-16 bolts I had planned to use from my '95 block do not thread in

 

[btfarm]

If it looks like 3/8-16 it's almost assuredly M10-1.5. .375x25.4=9.5mm

 

[denata]

Yes. M10x1.5-35 gr10.9
Part number 6008021 11513606

 

[denata]

If it looks like 3/8-16 it's almost assuredly M10-1.5. .375x25.4=9.5mm

But thread pitch ⅜-16 =1.587mm

 

[SnowDrift]

Thanks!

 

[btfarm]

But thread pitch ⅜-16 =1.587mm

Correct. I was just referring to the visual comparison.

 

[Husker6.5]

Be glad they're NOT British Standard Whitworth!!