Well I worked on mine most of the day and did not get anything done except the intake is back on. Rest of the time was tring to find a spot for both of the regulators. Finally decided on a spot using two of the rack & pinion bolts and a unistrut bracket.
Well the bolt on the Rack was literally the tightest bolt Ive ever seen on a vehicle. I could not budge it and can't get a good angle for a good pull on it. I gave up and decide to just add another nut over the top as there is plenty of thread, but that lead to a wild goose chase. The nut is metric and bigger than 14mm so no hardware store carries one. I'll get one tomorrow at a fastener shop.
What a wasted day!
Well the bolt on the Rack was literally the tightest bolt Ive ever seen on a vehicle. I could not budge it and can't get a good angle for a good pull on it. I gave up and decide to just add another nut over the top as there is plenty of thread, but that lead to a wild goose chase. The nut is metric and bigger than 14mm so no hardware store carries one. I'll get one tomorrow at a fastener shop.
What a wasted day!