-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
What use is the unit bolted to where a mechanical fuel pump was on 97 6.5
- Thread starter enjenjoes
- Start date
- Staff
- #2
They use that location for the drain off the turbo.
Like this,
Like this,
- Staff
- #4
Can you get a picture?
I thought this bolted there but after looking at the picture it some kind of pump with pulley setup
Thanks
Reason I'm looking as the Diesel will start and when it gets to 180 water temp at 1000-1500 RPM I get white smoke and loose timing when the trucks clod work fine but hit 180 only at 1000-1500 runs bad.
Ideals fin and will run down the road at 2000 great just those RPM are effected
- Staff
- #6
That is your vacuum pump. It is used to control the turbo actuator and EGR if equipped.