• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

What should I do?

What would you do next??

  • Aftermarket Turbo

    Votes: 1 6.3%
  • 4" Exhaust

    Votes: 8 50.0%
  • Boost / Pyro / Fuel Pressure Guages

    Votes: 6 37.5%
  • Gear change to 3.42 or 3.73

    Votes: 1 6.3%
  • Something else

    Votes: 0 0.0%

  • Total voters
    16

Chief915

915A Maint Tech
Messages
406
Reaction score
1
Location
Cecilia, KY
All,

I need your advice again. Here's the situation....I have some extra cash to spend on my truck in the sig. The truck is mechanically solid, nothing broken, leaking, worn out, starting to fail, etc. Suppose you could do a couple items on the list. What should I do next?

I use the truck mainly as a daily driver, probobly about 60% city. I rarely tow anything, when I do it is maybe 5,000 lbs.

What would you do?
 
All it looks like that you don't have is a 4" exh. and an ATT. GMTDScantech would also serve you well.
 
I am planning on getting the GMTD stuff. I do all my own work so it would definately be handy to have. I should have added that in the post earlier.
 
Didn't know if you were still around or if you had been shipped out.

Since you have the chip, I would at least replace the stock down pipe. Complete systems can be found fairly reasonable, if you know where to look. As a matter of fact, I have a down pipe I will give you, if that is what you decide to do.
 
I am assuming that the remote mount PMD is outside the engine not on the intake?

Definitely 4" exhaust. Gauges next. Then ATT.

I don't think you can change a Dually to 3.73 or 3.42 gear ratio?
 
I am assuming that the remote mount PMD is outside the engine not on the intake?

Definitely 4" exhaust. Gauges next. Then ATT.

I don't think you can change a Dually to 3.73 or 3.42 gear ratio?


The PMD is behind the bumper.

They sell 3.42 and 3.73 gears for 14 bolt 10.5" rear ends. I very rarely tow anything, so IMO there wouldn't be an issue with that.
 
Back
Top