W.T.S. trigger for command start

[EchoEagle]

Hey guys! Lastnight I installed a Compustar CM4200 in my truck and got everything working great except for the wait-to-start trigger... the *dark blue (-)* behind instrument cluster sounds like a bitch and I was wondering if there was an easier spot to access the WTS circuit? my brain box has both neg and pos sensing for WTS.

any help greatly appreciated. thanks! :-D

 

[diesel65]

Pass the wire thru the firewall from the remote start to the glowplug relay and connect it to the stud that that feeds power to the glowplugs when energized.

 

[chrisk1500]

My installer tapped into one of the GP wires itself. When the voltage disappeared, the engine cranked...

 

[EchoEagle]

sweet thanks guys

 

[buddy]

Or the wire that goes to the Instrument Panel light comes from the GPs and through the 5 amp Glow fuse under your steering column. So you can just tap into that fuse output.