vac pump delete??

[gmccrewcabdually]

if i ditch the vac pump what els do i need to do other than the belt??

Pete

opps!! mod pleass move! SORRY!! i shoulp pay Attention to where i am putting things!!

***JiF edit. No problem, Pete.. moved.

Thanks for moving!!!!!!!!

 

[ak diesel driver]

just a turbo master

 

[gmccrewcabdually]

I wont get codes or anything???? and ya turbo master is going on!! that was a given!!

 

[handcannon]

My K2500had a turbomaster on it when I got it. Sometimes when pushing it hard moving into traffic, such as onto a freeway, the SES light would come on and stay on (overboost) until I restarted the motor. It was more of an annoyance than anything else. For less than $5 I got parts from Radio Shack and did the boost fooler. No more SES light in that situation. Look up boost fooler, it's very simple to do.

Don

 

[ak diesel driver]

if you don't set it too high or run it fairly high sustained (towing) you'll be fine. if your going to do a tune they usually set it high or delete the overboost coding

 

[gmccrewcabdually]

ya HEATH is right around the corner I just found out so I plan on doing a chip from them!! but not for a bit! need to get the thing back on the road first!

So with a boost fooler I shouldn’t get any lights though??

Thanks

Pete

 

[handcannon]

You'll get the SES from other sources but not from overboost IF it is set right. I set my pot at about 30*. The pot has almost 360* of turn to the knob shaft. So it doesn't take much.

Don

 

[SnowDrift]

Orange and black vacuum lines can be removed, too

 

[gmccrewcabdually]

YUP all ready ditched the orange and black vac lines as thay where all cracked and busted!! thinking i might have over boosted and thats why motor went boom!!

thanks every one for the help!!!

Pete