Upper control arm bushings

[Tag George]

My upper control arm maybe both has a lot of play in it. So I am guessing the shafts maybe the bushings are shot. I have seen a low price on Dorman brand control arm assemblies that have the bushings and ball joints in them. The price is so low that it would be cheaper then buying just the bushings and joints.

1. Are the dorman control arm assemblies any good such as in this link? I found them for another $20 cheaper yet on another page. http://www.amazon.com/dp/B008ND49XK/?tag=jhuntlink-20

2.Any one of you guys have blow up exploded view of the uca assmbly and torque specs?

 

[Tag George]

Bump?

 

[NVW]

All I can help with is the torque specs.

Control arm to frame 1990 and earlier- 88ft/lbs
1991 and later- 140 ft/lbs

Balljoint to control arm C1500/2500- 17 ft/lbs
C3500 1990 and earlier- 52 ft/lbs
1991 and later- 17 ft/lbs

 

[Tag George]

Better then nothing TY.