Turbo gasket?

[hookedup50]

Ok. I've been Installing a Ted's engine in my 97 and with the exception of a punch list it Runs nicely with no codes. It was 2 years ago when I dismantled everything. Is there a donut gasket that goes between the turbo and the downpipe? Thanks in advance and have taken some pics throughout, and will post them when truck drives. Sorry for Newbie ? I just don't remember one there. Hitting punch list now. Very excited about not having to drive my Colorado ever again.

 

[jmiller]

Nope, make sure everything is clean and even. Watch for rust chips on the V.

I've had it leak if the V clamp is not tight. I will lift on the down pipe with a bar or jack to assure a tight even seal to the turbo while installing the clamp. This usually prevents leaks.

 

[Burning oil]

No gasket there. On the xover yes.

Edit: Was typing when John replied.

 

[hookedup50]

Thanks ,Im good with the crossover donuts and tightened the turbo clamp and it sealed. I was expecting a ses light cause the ip hasn't been timed. Thanks

 

[ak diesel driver]

has to be pretty far out to set the SES light