Stalling and Dying...

[Gunner0812]

For the past couple weeks the truck will stall out at low speeds 20-40 mph. It will restart. At night when I leave work at midnight. Driving down I-75 it will stalling I floor it and it will recover and be ok. Well last night it died on the 75 which sucked! :mad2: I changed out the OPS with AC Delco thinking in would be ok. It died again and tried stall out but floored it again and it ran good. Is this a pmd problem or something else?

 

[Brooklyn Tow]

Need to know what fuel pressure is when it starts to stall......Need to "Tape the fuel pressure gauge to the windshield" trick, to see whats up.

 

[Gunner0812]

Im going to try that.

 

[Turbine Doc]

Stacy have you cleaned the grounds and tested for tightness, all of them ? see gnd sticky in reference area, could be FSD where is yours remoted, was it a new remoting, or a "used but good" one at the time that has been operated under the hood at some point

 

[Gunner0812]

Ill be checking grounds this weekend.

 

[Gunner0812]

Found loose neg. battery cable on the driver's side. Hopefully that fixes the problem.