Paveltolz
Доверяй, но проверяй
I installed hood and fender louvers this past week to help vent the hot air out of the engine bay. Got the idea from another forum member, 635 who runs a GM 6.2 w/ 6.5 heads (hence, 6.35 or 635).
The installation write up is originally posted over in the GM 6.5 Diesel Engine section; it is quite long but there's pictures too so. So, in the interest of sharing with the whole community, here's the link to make it easier to find.
http://www.thetruckstop.us/forum/showthread.php?t=23171
They're manufactured and marketed by RunCool Hood Louvers and can be found on the web at http://raceace.com/ (link posted with permission from Mods)
Hope you all enjoy.
Paul
The installation write up is originally posted over in the GM 6.5 Diesel Engine section; it is quite long but there's pictures too so. So, in the interest of sharing with the whole community, here's the link to make it easier to find.
http://www.thetruckstop.us/forum/showthread.php?t=23171
They're manufactured and marketed by RunCool Hood Louvers and can be found on the web at http://raceace.com/ (link posted with permission from Mods)
Hope you all enjoy.
Paul
