bigdisneydaddy
Recruit
Anyone have experience with replacing the axle seals ? I ended up going from a straight up brake job all the way to a bare spindle due to the dust shields being rotted off. One of the seals was already bad. I had the seals pressed back into the hubs after I cleaned everything up but I am looking for tricks on setting the hubs back on and getting the seals to seat. I ordered the socket for Monday so I can torque them properly to set the bearing pre load. This is one of the trucks at work and as much as I dont have time to do these bigger jobs it would be nice to learn something while getting paid for it.
thanks
Scott
thanks
Scott