• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Quadzilla Stealth 2 Programmer

rickaroo

New Member
Messages
3
Reaction score
0
What does everyone have there Stealth 2 settings on. Looking for best fuel mileage plus a little torque when i need to pull. Only pull 5% of the time, other than that in town driving and some hiway mileage.

Thanks in advance. Rick
 
If your tranny is not built, then dont go over 70hp.

(just in case you decide to read this reply 4 months later) :)
 
If your tranny is not built, then dont go over 70hp.

(just in case you decide to read this reply 4 months later) :)

lol. agree with this. I rolled around for 40k miles with it on the 135 or 160 tune and toasted the trans. Finally thought "FK it" and put in the 215 and drove it another 10k, slippin like a mf'er. Towed 15k+ trailers, raced, and generally just beat the living s**t out of it. They wont last long on the bigger tunes, especially if your right foot is as heavy as mine.
 
me too, I just couldnt do the 20, 40, 70 tunes....

its also apparent you can still drive an Alli even though its retarded through hp :) cuz I beat the hell out of mine too before the stage4.....
 
Back
Top