• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Pulled codes but no check engine light??

heavrolet98

New Member
Messages
41
Reaction score
0
Location
Sebring,FL
I just got this truck and the check engine light isn't on but I decided I'd go ahead and scan it just to see if there were any stored codes and sure enough I came up with four.

2011-10-19174219.jpg

The truck does have a homemade turbo master on it, could that be causing this code? If so, is there anything I can do about it?
2011-10-19174151.jpg


2011-10-19174133.jpg


2011-10-19174122.jpg
 
yes on the boost guage. is your check engine light coming on with the key in the run position and the engine not running?
 
Look on the side of your transmission for two separate two wire connectors. Check that the insulation condition as it falls off by the transmission connector and shorts out. These are the RPM/speed sensors that one of your codes may be about.
 
Back
Top