sshewins
Jesus Freak
A breif rewind: I changed the heads with redone ones this past summer. It ran pretty good so far. However, it just recently need a top off of coolant. No biggie, but I started wondering - why? Well today, I added the needed amount and let it idle up a little and to my supprize, there was a a small amout (about 1/2" by 1/4") of bubbles/foaming where the turbo sits on the manifold
. I didn't use a gasket. I've not changed the tuna can either (only have put about 5000 miles or so since we got it last year). There is no hardening of the upper radiator hose, no foaming in the cooland reservoir, nothing that would indicate another bad head gasket. I am using synthetic oil.
Could this possibly be normal?
Any help would be appreciated. Thanks in advance,
Could this possibly be normal?