Nico
New Member
is there a way to pull codes on a 95 or 96 6.5 without a scanner?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
obd II
- Thread starter Nico
- Start date
Crankme69
New Member
1994 & 1995 is OBD1
1996 & newer OBD2
Alot of info here
http://www.thetruckstop.us/forum/showthread.php?t=2657
1996 & newer OBD2
Alot of info here
http://www.thetruckstop.us/forum/showthread.php?t=2657
Last edited:
ak diesel driver
6.5 driver
Crankme69
New Member
LOL YUP
buddy
Active Member
OBD1 jumper method on the port, make sure not to crank the engine with the jumper in.
And know that if there are codes present it may not flash DTC12 first.
To clear the codes it says to depress the pedals at the same time, do that for at least 15 seconds.
And know that if there are codes present it may not flash DTC12 first.
To clear the codes it says to depress the pedals at the same time, do that for at least 15 seconds.
Nico
New Member
I was asking cause my neighbor has an OBDII from a customer at the shop but was gonna ask someone else to scan the truck since he doesnt do any of that, and I told him I would ask if the paper clip method worked on OBDII as well.