more codes

[Nico]

Hey amigos

I just replaced the vacuum pump on the 1500 cause it went out, I tried to talk the old man into getting a Heath's TM and tune but he wouldnt budge. Anyhow, the truck seems to be working fine, but the SES light came on again, retrieved codes, 32, 33, 44, these are all EGR related but theres an F intake on the truck.. I think he tried starting the truck with the paper clip still in, and now it wont start. Help?

 

[JMJNet]

Check the fuses for starting.

 

[buddy]

It shouldnt code if the vacuum lines and vacuum sensor is still all there. But if you also removed the solenoids for EGR then you would code. there should be 3 solenoids, 2 EGR and 1 boost.

A vacuum line diagram should be on the radiator cover. Then just plug the line that goes to the actual valve which is no longer there, because its an F intake.

Or just get a PCM PROM for an "F" engine.

For starting check the ECM fuses like suggested. There is a no start tips at the end of this file.