• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Just joined

A

Aftondude

New Member
Messages
1
Reaction score
0
Location
Afton, Va.
Hey folks,
Curtis here in Afton, Virginia. I joined to get info and help concerning my 87 Chevy with a 6.2. Its got about 349K miles and now time to fix a leak in a head gasket. So I'm checking out the forms for helpful info. Thanks
 
Welcome to the best 6.2/6.5 forum on the internet today. We are truly run by diesel enthusiasts for diesel enthusiasts! :welcome3::welcome5::welcome2:
 
Afton Mountain eh, boy I miss that drive I've been in Ms since 86 no mountains here, parents & siblings still in Tidewater, cousins and lots of other family in Roanoke area love the Blue Ridge in the fall .

Welcome to the site.

Pop over to the 6.2 section and folks there will fix you rite up, some sage advise in there about the 6.2 elder brother to the 6.5's I drive head gasket change is pretty straight forward, easier done out of truck than in it, but can be done in truck 1 time use TTY bolts used have to replace those, if it's in the budget ARP studs are better choice.

Once you visit a few times the site will be easier for you to navigate, if you need help figuring it out ask here guys will point you the right way, for now here is the 6.2 section link http://www.thetruckstop.us/forum/forumdisplay.php?8-6.2-GM-Diesels
 
You must log in or register to reply here.
Back
Top