• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Injection Pump TDCO and scanners?

JIG 4 2NA

New Member
Messages
19
Reaction score
0
Location
southeast PA
I am about to change my injection pump with help from my dad. My dad has been working on 6.2 & 6.5's everyday from when he was in the Marine Corps to presently for the past 34 years at a large industrial bakery that uses them in the delivery trucks, but he has never done one with a electronic pump just manual pumps. He said that setting the timing is the same its just getting the ecm to recognize the new setting. So my question is what scanners will do this besides a tech2? I know I can do the KOKO but would like to use a scanner instead. Let me know if there is any that work, Thanks.... Anthony
 
Back
Top