I'm looking for some blue & yellow, 5/16 & 3/8 heat shrink ring terminals / eyelets

[jrsavoie]

I'm looking for some blue & yellow, 5/16 & 3/8 heat shrink ring terminals / eyelets, with the larger Outside diameter rings. 10 or 20 each.

The rings on the terminals I had were about the same size as a washer. 5/16 was probably close to 5/8" diameter

And the 3/8" was probably about 11/16.

I forgot to measure them. I didn't think to. I thought I'd find them within a couple minutes of searching.

I used my last on Sunday.

 

[jrsavoie]

I think these will work. I think they're a tiny smaller than what I had. The others were about the size of a serrated but.

I believe these will work

View attachment 2010299

https://www.amazon.com/gp/aw/d/B09KLSDRQB/ref=sw_img_1?smid=A1X2NG86VMWESC&psc=1&th=1

 

[jrsavoie]

I think these will work. I think they're a tiny smaller than what I had. The others were about the size of a serrated but.

I believe these will work

View attachment 2010299

https://www.amazon.com/gp/aw/d/B09KLSDRQB/ref=sw_img_1?smid=A1X2NG86VMWESC&psc=1&th=1

Well, that didn't work out. I should have checked the measurements before ordering.

The 15mm OD sounded right. But is considerably smaller than what I want / had.

I'll have to measure the OD on what I have here.

I'm returning these.

 

[jrsavoie]

The good ring terminals / eyelets have outside diameters of about - 3/8" eyelet - .725" / 18.48mm

5/16" eyelet about - .633" / 16.12mm

Looking again