• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Help!!!!! P0700 and P0722

W

whatnot

Member
Messages
391
Reaction score
3
Location
Waunakee Wisconsin
This morning the brake light, anti-lock light and SES light all came on. I think it is stuck in 2nd gear when it will move otherwise it just flashes the shift indicator and won't move. Any ideas what it can be?
 
Sounds like a output speed sensor, or a harness problem. The p0700 is a MIL request by the TCM and the p0722 is for the output speed sensor.
 
Thats correct. Also check to make sure your harness hasn't rubbed through anywhere, and there is no damage to the connector
 
I just changed the sensor and it is just the same. The plug looked ok. Is there any places to look at the wires that would be likely broken?
 
I found the problem. The wires come from the speed sensor and go into a larger bundle. Another small one goes into the large bundle at the same place. I pulled on those wires and I got about a foot of wire with two ends sticking out.
Now I need to splice them back together. I don't really feel like soldering directly above my face. Is there a better way? Will butt splicers be ok?
 
Use seom nice shrinkable butt splices. If you dont have them then put some heat shrink tube over a regular butt splice.
 
You must log in or register to reply here.
Back
Top