• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Got Pretty Much An All Cognito Front End Now...

Mad Maxx

See, what had happened was...
Messages
5,995
Reaction score
123
Location
Long Island, NY
The Truck went in Today for Upper Control Arms, Pitman / Idler Support Kit, Idler Pivot Assembly, HD Tie Rods, HD End Links.

Steering Feels Good now, I think I Lost some Turning Distance though, I gotta Check that Out, and See if / where it's Hitting.

One thing I did Notice though.

Things Feel ALOT Bouncier than they were before in the way the Truck Rides. It's kinda Jittery now. Not like I'm gonna Lose Control, just Bouncy.

Does that Sound Normal?
 
Here's where it's Hitting.

The PISK Arm on the Passenger Side is Touching the Frame at Full Turn to the Right. Could the Brackets have gotten Mixed Up? When I Turn all the way Left, nothing Hits, but the Driver Side Bracket is VERY Close.
 

Attachments

  • IMG00020-20100712-1949.jpg
    IMG00020-20100712-1949.jpg
    47.9 KB · Views: 7
  • IMG00021-20100712-1949.jpg
    IMG00021-20100712-1949.jpg
    43.7 KB · Views: 7
Great to hear you have the front end all set up now. On the braces some trucks will touch at full lock due to some trucks will turn more than others but it's not by much. We have not seen problems with this so I would say you are fine, common on some trucks.

On the truck ride feeling, 2 things...1 it looks like you did not change the idler and pitman arms them self, how much slop did they show? 2 if you can post a pic of your suspension from this angle I can offer a possible suggestion:

hd_front_OEsuspension.jpg
 
Nope, didn't Change Out the Arms. Still the Stock ones on there. The Truck only has 31k on it, and the Installer didn't Mention that they should be Changed or was Concerned about it, so I would say they are ok.

I'll try to get a Pic like that either Today or Tomorrow.
 
Back
Top