• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

fixin it up

hotrod0872

New Member
Messages
18
Reaction score
0
Location
Hernando, MS
went thur front end yesterday,new tierods,idler arm,pitman arm,control arm bushings,and swaybar bushings!
ordered walbro pump (thanks Leroy)
ordered ATT & Kojo tune & FTB (thanks veg-out &kojo)
got new bosh injectors and new glows
ordered dual tsat update and Dmax fan and clutch(kennedy)
put truck in body shop today for new paint:D
should get it back by next weekend just in time to install new parts):h
what next?
 
Remove snorkel in the fender that restricts the intake. 97+ airbox. Remove the oil cooler and clean the condenser behind it. Remove and clean the radiator.
 
Thank you!

Where to start? its never ending. If you just looking for stuff to do then greese everything front end, drive shaft/s. Its getting hot out so clean evap coils too. Change fluids. Tire pressure...........were does it stop! :thinking:
 
Back
Top