treegump
Romans 3:22-24
I think this can go here...if not, I can ask again in the 6.5 forum.
Where is the electric brake controller plugged into? My truck already had it, didn't work, so I bought another one, and it still doesn't work. There are 2 sheathed wires with 3 wires in them a piece and they go from inside the truck through the floor board and to the engine compartment and from there back to the back of the truck.
1 set of wires go to the fuse panel in the engine compartment - to the main lugs of the fuse panel. The other set appears to go towards the driver's side battery - but the wires appear to be snipped...so I don't know where they go.
Then both wires run to the back of the truck and I have a 7 pt plug, a 6 pt plug, and a gooseneck plug in the bed - so I have 3 wiring harnesses going into 2 sets of wires headed back up towards the engine compartment.
I'll get pics posted when I get a chance.
Where is the electric brake controller plugged into? My truck already had it, didn't work, so I bought another one, and it still doesn't work. There are 2 sheathed wires with 3 wires in them a piece and they go from inside the truck through the floor board and to the engine compartment and from there back to the back of the truck.
1 set of wires go to the fuse panel in the engine compartment - to the main lugs of the fuse panel. The other set appears to go towards the driver's side battery - but the wires appear to be snipped...so I don't know where they go.
Then both wires run to the back of the truck and I have a 7 pt plug, a 6 pt plug, and a gooseneck plug in the bed - so I have 3 wiring harnesses going into 2 sets of wires headed back up towards the engine compartment.
I'll get pics posted when I get a chance.
