CtChevy427
Fuc*ed over by head admin......
I am looking for a simple way to disable the truck. A hidden toggle switch will be fine. Attached are pictures of the under hood power center.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Disabling the truck
- Thread starter CtChevy427
- Start date
Pepperidge
Member Advocate
why not just pull the ign relay or the starter relay?
you could always just put a perco switch on the batteries...
you could always just put a perco switch on the batteries...
cgreen
Recruit
Put a Ford badge on it. Then it will randomly disable itself without even trying. :hihi:
CtChevy427
Fuc*ed over by head admin......
I have pulled the started relay before. I was just hoping to find something a little more convenient.
Ridge_Runner_Diesel
The Still Master
Open the hood, un-clip the lower bale connector on the engine harness and pull out approximately 1/4", it is not easily noticed and will allow the truck to crank but not start.
- Staff
- #6
Put Rosie O'Donnell in the passenger seat... guaranteed, nobody steals the truck. 
NVW
Well-Known Member
Put Rosie O'Donnell in the passenger seat... guaranteed, nobody steals the truck.
lol
There's always some loser on a dare.:nonod:
Put Rosie O'Donnell in the passenger seat... guaranteed, nobody steals the truck.
Yes, but deodorization, fumigation and disinfection becomes a problem...