Cruise control on a 1994 K1500

[matuva]

I know that on a 1966 and up K1500, you can just swap the turn signal. On a truck with no cruise control, just swap to one switch with cruise control, connect it and you're done.

On a 1994, it seems to be another story.

I changed one turn switch and the stick on a 1994 truck today. This truck had no cruise control. I thought this would be as easy than on a 1996, but I could not find any pigtail where to plug the stick.

Anyone with a 1994 with cruis control can check and tell where to connect?

 

[wiggle]

You have to run a separate wire to the ECM your wiring harness doesn't have it.....there is no wire connected at ECM for cruise allotment...it's in the same block as main power to ECM first one closest to firewall