• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Concrete in my engine??

greenmeanh1

greenmeanh1

Member
Messages
103
Reaction score
12
Location
Toronto
Old news i know, but can someone point me in a direction where i can find out more about the details of this practice of filling the water jacket with Hydra Cement.??
Much thanks!!
 
There used to be a product called 'hard blok' that was sold by the performance retail. Probably the same substance you describe. May try and look up hard blok? I bet they still sell it.
 
Iv'e done it,and won't ever do it again. The side of the block and pan rail overheats,but the water temp will be cold.
 
I have it in my motor, I tow hard all the time and I haven't found any hot spots at all and I have checked several times during a trip, the bottom of my block is always much cooler than the deck area..
 
For the Bonneville Racer, didn't Bill fill his block to 5/8" below the deck? I seem to recall that from the DP article they did on it.
 
You must log in or register to reply here.
Back
Top