• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Compression test

Yep. That's the place. I figured that was it. I know 6.2s and that is usually the first sign of IP death. Wanna buy a Tahoe cheap ??
 
Matt Bachand said:
She deserves to live again.
Click to expand...

That's for sure. i wonder what i'm going to do with the spare dud IPs.

anyone need a fancy looking doorstop? :rolleyes5:

the worst part of the job is that i've got to drop the fuel tank and see how much crap is in there. i'm not putting a new or reman IP on and having it suffer the same fate if there is indeed crap in the fuel tank. the tank's got the skidplate over it so i don't' even know how badly rusted it may be.
 
iamdave0887 said:
:

the worst part of the job is that i've got to drop the fuel tank and see how much crap is in there. i'm not putting a new or reman IP on and having it suffer the same fate if there is indeed crap in the fuel tank. the tank's got the skidplate over it so i don't' even know how badly rusted it may be.
Click to expand...

I was going to say that.
 
how tough is it to drop the fuel tank on a blazer kenny? It looks somewhat straight forward. drop skid plate, drop tank after's it's emptied one would think.

i just don't want to end up trashed the sending unit trying to get it out as it's probably been in there since the truck was new.
 
Can ya cut/make an access hole/flap in the bed anywhere? Would be useful, and depending on condition of your truck, mighr already be half way there :)
 
Matt Bachand said:
Can ya cut/make an access hole/flap in the bed anywhere? Would be useful, and depending on condition of your truck, mighr already be half way there :)
Click to expand...

i can get a whole new tank for $140. i'll bet the tanks pretty shot, but it'll come down and i'll take a peek inside. if it's shot a new tank will go in it's place.

Matt i'd prefer to not make more holes in the truck. ):h Mother nature has that very well covered. :mad2:
 
iamdave0887 said:
i can get a whole new tank for $140. i'll bet the tanks pretty shot, but it'll come down and i'll take a peek inside. if it's shot a new tank will go in it's place.

Matt i'd prefer to not make more holes in the truck. ):h Mother nature has that very well covered. :mad2:
Click to expand...

She's a whore...:)
 
Brooklyn Tow said:
DieselPro would probably make sure you got a good pump.

Only hear good things about Pensacola also, but they won't be building a pump "A La Minute".....They'll probably just pull one off the shelf.
Click to expand...

I"ve got a Dieselpro DB2 on order.
 
You must log in or register to reply here.
Back
Top