COdes 32 and 63

[figment]

Bin getting these , 32 is EGR Circuit Error? I think this mean to toss the egr all together.

But, 63 Accelerator Pedal Position 3 Circuit High? Does this mean I have to get it calibrated? Or replace it?

Other than getting these two nuisances Run's like a top, Thanx to this site I've got it running quiet and smooth. :thumbsup:

 

[buddy]

The PCM can run fully off of 2 out of three APP sensors. Could be that its shorted out.

You can pull the harness of the pedal and test the sensor. On the pedal there should be resistance between E and K. Check the cable side, with IGN on there should be 5V between E and J. E should be 5V and J a ground. the ground could be having poor contact, unplugging and plugging it back in might help.

The 32 probably means you have a vacuum leak, because the vacuum/baro sensor is not reading as much as the PCM wants. Is the vacuum line still hooked between sensor on firewall and the vac lines going to solenoids on valve cover?

 

[figment]

Thanx, sorry for the late reply, bin juggling everything lately. Workin the night shift I really don't have any ambition to go fix it as of yet. Probly have to wait for the weekend.