• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

ATT install instructions

ryridesmotox

ryridesmotox

New Member
Messages
24
Reaction score
0
Location
San Diego area
Ok after several attempts at searching, I am unable to find good details on how to install my new ATT. I just want to make sure that I have all the parts necissary for a quick install, as this is a hand me down turbo. If anyone has the instructions and is able to Email them to me I would be eternally grateful. By the way thanks Extremesounds for the ATT looks awesome, can't wait to put it on... with my new glows, injectors, PMD relocation, fuel filter, and racor lift pump. I got a job ahead of me. I'll take good pictures and do a good write up about the install too, I promise.
 
whatever you do, make sure to replace the clamp on the turbo side of the intake hose. the factory one will almost but not quite seal. Only times it's acted up is when I'm pulling heavy, then I lose boost and get hot with no power. Thought I fixed it the first time by adding some material underneath it, but the correct fix is an appropriately sized hose clamp.
 
Detroit Dan said:
whatever you do, make sure to replace the clamp on the turbo side of the intake hose. the factory one will almost but not quite seal. Only times it's acted up is when I'm pulling heavy, then I lose boost and get hot with no power. Thought I fixed it the first time by adding some material underneath it, but the correct fix is an appropriately sized hose clamp.
Click to expand...


Oh so your not supposed to add material under it:eek:. Whoops lol, guess I better go buy me some appropriate clamps then...

Glad to know i wasn't the only IDIot to try that rememdy.
 
Dang kojo that looks cool. How much did that cost? I am just going to use a couple $2 hose clamps though cheap, easy, gets the job done, just like the 6.5 diesel motor.
 
I cant remember price for hose, but i think those clamps was something like 5€ each. I decided go that route after i was pissed of trying get leaks off from that original hose, it always turned very dirty and some of oil dripped over engine and down from there..
 
Oh haha you are from finland, I was wondering what that funky looking E was. Duh euro, haha early in the morning for me. Yea I am going to get a new set of hose clams and hose and call it good.
 
Just PM member Veg Out/Walking J/Pat, or maybe member Slim Shady/Dennis.....someone should be able to get you a set of install instructions.
 
kojo said:
Nope, i haven't never had an intercooler
Click to expand...

Then I take it the other one with the inter-cooler in your dyno test thread is someone else's.

BTW a double negative becomes a positive. So "haven't never had" really means you've always had. I apologize for the grammar lesson and owe you a drink for that.):h
 
You must log in or register to reply here.
Back
Top