Ahh, Choices

[dually man]

So, is what I got is a '99 humvee 6.5 that I just removed the heads on it because of the oddball intake angles. I am getting a very low miles 1992 gmc fed ex van 6.2, it has 30,000 on rebuild. Will the heads work on the 6.5 or do I have to change out injector lines, will 6.5 turbo injectors fit 6.2 van heads?

 

[OrionThade]

If the hummer is turbo charged with the center mount turbo, then the "odd-ball" intake angles are for the intake runners. The NA and side-mount turbo have 90* bolt holes for the intake and while the center mount turbo has 60* bolt holes for the intake.

The long of the short is that the block is the same. You should be able to put 60* heads on the block.