1993 6.5 liter f detroit mechanical f.i. Injector removal

[Diesel Engine 909]

I want to remove the fuel injectors from this motor and do a compression test. How do i get the injectors off. I have a compression testing gauge kit. There seems to be a lot of blowby coming out of diaphram mounted on the valve cover next to turbo when cranking. It wont start. Engine is getting fuel, and glows are getting proper voltage.

 

[ak diesel driver]

If your getting blowby cranking it over and not running I'd be thinking hole in piston. Usually compression is checked thru the glowplug holes. injectors unscrew out of the head tho.

 

[JMJNet]

Short answer is with a tool or two or three.

 

[Burning oil]

Comp test is done via GP holes as AK said. 10mm socket & accy for tools to remove them.
You can have 12v at each GP but they can still be bad. Remove the power wire and ohm each one. I dont know the resistance, but if they read like a direct short then replace.

 

[ak diesel driver]

that would be an open reading not a short

 

[Burning oil]

Yes sorry.