2000 3500HD with low mileage (75000 Orig)
When I am going downhill or on a flat surface the engine surges often dropping as much as 800 rpm.
If I move the accelerator pedal slightly it snaps back.
I also cannot press the accelerator while sitting still and maintain a constant rpm. It wants to...
Hi folks, I’m looking for a few good gurus to help me with my project. I have an ‘89 GM diesel crew cab. She spent many years as a fleet vehicle for a pipeline service company, then went through half a dozen private owners before I rescued her.
I was told she had an 6.2L originally, and that...
It’s hard to start with one particular spot on what’s wrong with my truck. I have a 97 chevy c2500 with the 6.5 turbo diesel. I had a p1214 code and I used a tech 2 to find out I was at 2.46 degrees which should be .25-75 after 77c or 170 f. I ordered the 3 wrenches to adjust the pump. Adjusted...
I new to the Community.. I'm thankful we have things like this. I just picked a 1994 Extended cab, 2wd, Automatic truck with 154.000 miles on it. I got the truck running and drove it home for $800 dollars. I bought it taking a little bit of a chance. It had what sounded like a rocker arm that...
I just got my first diesel. A '93 chevy silverado turbo diesel. And I know nothing about them. I want to go threw it and see what might need replacing or cleaned. For instance I took off the air filter to look at what I assumed was a big carburetor. Can I use carb cleaner in there? And I live...
Ok so call me crazy but I'm a diesel tech and know my way around the 6.5 diesel all to well I have owned many and done small mods but I want to go BIG custom girdle studded bottom and head studs oring the deck I want to do this all in a 6.2 red block with forged steel crank optimizer heads...
Hi Everyone,
First post here, but been browsing the forums for the past two years. Grateful for the wealth of information archived here.
I purchased the truck in my sig in the spring of 2016, and it came with an extra tune. I was told by the owner that the truck currently has a "buddy" chip in...
6.5 TD PARTS “USED” FOR SALE (MAINLAND USA ONLY)
All parts are off of a 1999 GMC K2500 Suburban “F”. All prices are + S&H, PM your zip code so I determine shipping cost to your AO, PAY PAL + fees accepted.
Gear Drive (DSG) DS-4 replaces timing chain & ‘never needs replacement’ $225.
Fluid...
I have a 94 Cummin's 12 valve w/60k I'm going to install in the 99 Burb.
Wondering if I can get any input from those who have done this.
I'll be using the 4L80e and because I still have the AutoTrac thinking the stock ECM will do for trans control, etc., I do plan to go w/NP241c in the near...