Search results

Thanks for the advice. Hopefully I can get back to it today. The storms are supposed to break this morning. 38 degrees right now with fresh snow on the mountain tops. Have to get it done this weekend. Thanks again everyone.

97 Chevy K2500, When I bought this truck there were no indicator lights on the switch. I replaced the switch, everything worked fine for a couple of weeks. Now I have 2 wheel and 4 lo. Will not show indicator light or lock into 4 hi, but will work in 4 lo. What am I missing, loose wire...

97 Chevy K2500, What is the secret to get the pitman arm off the power steering gear box shaft without pulling the gear box out?? Thanks for any advice.

Thanks for the input everyone. I have decided, for now, just to repair the one I have. New brakes, drums, bearings. When I pulled the bearings out of the hubs, I found metal pieces. I have pulled the cover off the diff and drained it. What is the best way to clean the diff good before I...

Have a 97 K2500 gasser with full floating, 10.5" ring gear, 4:10 gears rearend, in the middle of having to do a complete brake job, drums, shoes, bearings and possibly have a bad pinion bearing. Will the rearend out of a newer truck, say 2001, with disc brakes fit with out a lot of work? Would...

Thanks for all the suggestions. Still working on this, everything hit the fan at once this last week, U-joints on the duramax, alternator on the S-10, rear main on the 7.4 and rear end on the Jeep. But the upside is found out as long as the enigine is running clean, the county doesn't care...

I used to have relative in Alaska till he retired and moved to St. George, UT.

Both. But cancelled the appointment, couldln't get there cause I had most of the connectors torn apart trying to clean and inspect them. Even though it reads in spec by the scanners, I keep going back to the TPS being suspect. Thanks again for all the advice everyone. I am going to try...

Ten minutes north. I am two blocks west of the west gate of Hill Air Force Base.

Thanks for all the suggestions. Headed down to beat my head on the wall some more. Received a phone call from a mechanic in southeast Arizona this morning telling me to check the spring on the waste gate??? Thanks again for all the suggestions. Hopefully can find something, have an...

93 6.5TD 4L80E 260,000 miles, stock. The "cel" keeps coming on and going off. Using the paper clip method to pull codes the only one present is 12. I have had it to the GM dealer and 2 diesel shops and 1 trans shop. None of the 4 have been able to pull any codes with their scanners...

Sunset, Utah, thirty miles north of Salt Lake City.

Found this site from another site. I have spent several hours in the last week on here. Lots of good info. Hope to be able to contribrute with the limited knowledge I have.