Search results

Hey all, I'm having some issues with my car, a 1991 Camaro RS convertible, with the setting up a trailer wiring harness. My trailer has a 4 flat and the car needs to be a 5 wire because it has stand alone turn signals. I wired the car up with a 5 to 4 pin harness (Hopkins #48915), and using my...

I'm familiar with the galvanic corrosion; it's going on a Ford😆 I was concerned with the aluminum bending or denting/grooving. Looks like I will try an aluminum one out just to have some bling hanging out my a_....errrr receiver.

So has anybody used an aluminum ball hitch? Did it do well in regards to durability and wear?

I've been looking at ball mount drop hitches and trying to decide between a steel one or an aluminum one. I know the steel will probably last longer, but the aluminum one entices me because of the anti-rust advantage. And doggone it, the aluminum one looks so shiny! So really wondering if anyone...

Did well on price, but the new owner didn't really seem to be the internet forum type. Replacement is a 2017 Ford F250 CCLB. Its vitals are in my signature and is my avatar pic. We'll see how it goes.

SOLD:happy: (😢) Gonna miss her......

Seats aren't trashed, but the pictures don't help in verifying this. But just for War Wagon(ok, everyone)here are more pics to include interior.

Yeah, that's what a life of inside storage will do for ya.

Copied this write up off my Craigslist ad so apologies for the over explanation of some things listed. Interested?, let me know, price negotiable. 1998 Chevrolet C3500 Crew Cab Longbed Diesel in great condition and low mileage is ready for a new home. It has the Cheyenne trim level with the...

The truck has been running like a champ. Mind you, it's far from a daily driver, having only last month passing 100k miles, but I did use it to tow a 7k load about 200 miles and had zero problems. Still haven't hooked up a pressure gauge so can't give any concrete numbers, I did try to bleed the...

No, I don't, but think I will mount one because I want to make sure I'm getting consistent good pressure throughout the power band. I can put one drawing off the top of the motor fuel filter, right? Although I do have the newer filter that has the cap integrated into the filter so there is no...

Thought about it, but I don't have the original mounting bracket anymore and I do have a prefilter setup in there already. I did order the frb-11 and installed it today. Its definitely pushing out some serious fuel, but its eerie that it only runs when and how hard it needs to. I was under the...

Thanks WarWagon. I'll look into it. Not wanting to put huge money into this as my truck really doesn't get used that often. Some of those aftermarket kits can really get expensive.

Yes, looks like I need to contact him on possible replacements. Not seeing much out on the web and most have long lead times. Thanks for the replies.

My FRC-10 gave up the ghost and I'm having a hard time finding a replacement that isn't special order with a long lead time. Does anybody know of a place? I don't run the truck alot so not real keen on spending a bunch of money on an entire new(insert brand here) setup.

Hi all, My brother is looking at the 3.0 ecoDiesel Dodge trucks and has seen fuel economy numbers that are varied. In particular, a 2015 two tone Laramie and the 2015 SLT have the same engine, transmission and differential, yet the mileage is 17/21 and 19/27 respectively. Is this from the...

Hey all, got a good question. I'm trying to put tires on a diesel pusher and so far have been told it needs 19 ply tires put on it as it is a 40' single axle duals set up. I believe 12-14 ply is norm for tractor trailer combos so why in the world would I need more than that. Heavy haul trucks...

I went with a LG L41C because of going to Straight Talk. Have nothing but good things to say about the LG, but do wish it had a larger megapixel camera.

if he's so intent on the upkeep of the truck, why in the world would he not replace the head gasket before selling it? Something's not adding up.