thanks guys,
I've been driving the truck alot lately just to see if would stall out again but it hasn't. The engine light does come on now and then when the truck is going down a hill but other wise seems to run fine. I will try adding the sae30 in stead of the 2 stroke stuff and see if...
Buddy,
Thanks again for all the info. I am going to see if I can get my hands on one of these scanners you speak of...
About two weeks ago I had dissconnected the batteries to clean up the connections and had them dissconnected for a few hours while doing some other things. Would this...
Buddy,
I have cleared up the dtc 17 and 18 and have not had them come back now for a while. I am still getting the code 36 usually as I am just about to head down a hill which is strange. I did some experimenting with my spare fsd and stock resistor. I relocated my fsd cooler to the inside...
Hello all... I was away on course and got back a couple days ago and starting back at the truck again.
A further update on the truck,
I started the truck and this time I added some lubricant additive the a buddy gave me to try from stanadyne. I noticed that after filling up and driving...
Ok... here's an update.
I put the exhaust system system on from ssdiesel which took me about 3hrs. I had to cut off about 3-4" off the final segment of pipe that ends up being the tailpipe. Also had to weld on the orig hangers but I knew I would need to. Went together pretty well except for...
Thanks everyone for the responses... Where do a get b100 bio??? Also, anymore thoughts on weather the OS filter can be removed or not???
I don't think that my dtc36 code is heat related as it displays weather it is warmed up or not. I remember testing a known good pmd not too long ago...
Buddy, i hear ya on the 2 stroke oil... I think I will do that the next time I make it to fill up. I talked to my mechanic friend and he suggested that it may be the IP timming that might be off slightly. Any thoughts on this???
Acesneights1, I noticed that my pmd got hot after awhile too...
When I bought the truck the pmd attatched the the fsd cooler was bolted to the intake manifold. I had read somewhere that it was not good to place it there due to the heat. I have since moved it to the drivers side firewall still attatched to the fsd cooler. I heard different people say that...
Hey Thanks for responding.
Here is what I have done so far...
I have cleaned all of the electrical connections to the frame and engine that I can find as well as both batteries. I have checked the 15 wire connector behind the fuel filter and cleaned both ends of it. I checked the...
Hi all... Recently purchased 1995 burb diesel with 195000 miles. I am pleased with my (new to me) ride and have done some upgrades that have been recomended by those on dtr. I stil have a few more I would like to do of course, money and time permitting. I have been having some issues with dtc...