Search results

It was mentioned that we might should start another thread for Stoney. I agree so that it doesn’t get to confusing being mixed in with the other post in that thread. @btfarm is there a way y’all could have a section titled “Help a Brother Out” and then someone can start threads under that...

The last time I drove the truck I could tell it was harder to take out of park than it normally is. I pressed the brake pedal and it took more effort to get it into another gear than it normally does. It didn’t take a lot of muscle to move the lever at all but it was a noticeable difference. Not...

After changing out the valve covers and putting everything back together I’m ready to bleed the air out of the lines so I pulled the 7 easiest glow plugs. These have about 16 thousand miles on them. Do they look good for that amount of mileage? And do they look good enough to keep running them...

For the past year or so when I go to cut the air condition or heat on it takes a minute for the air to come out of whatever vents the knob is on. The fan speed has always worked as it should but sometimes when I cut the fan on I can here the fan in the dash running but the airs not coming out of...

GM CAR ELECTRICAL SERVICE MANUALS 1989- Electrical systems Service manual for Buick- LeSabre, Electra, Park Avenue. (New product information manual and Final addition manual) Good condition. $60 Shipped 1990- Electrical systems Service manual for Buick- LeSabre, Electra, Park Avenue. Good...

Im about to change out the shoes and wheel cylinders on my 2000 K3500 single wheel. What break tools do I need to do this job easier and quicker. I have done Shoes and wheel cylinders before but have never bought the right tools for the job so I always fought with the springs and everything...

The carter lift pump that I bought last year, might have been this year 🤷‍♂️ has dropped dead on me. It was reading over 10 lbs on the fuel pressure guage when I first installed it but that didn’t last long. Before it quit it was reading 4 lbs idling and would go to 0 lbs with nowhere near full...

Im getting ready to install the Brass Works heater core that some of the forum members here donated to me and was coated by Twistedsteel Performance. I want to flush the system real good and do it right before I put the brass heater core in. I thought about unhooking the radiator hoses and...

https://greenville.craigslist.org/pts/d/laurens-gmc-sierra-yukon-grill/7012913806.html Thought it was a pretty good deal even though it would need painting again.

Hey Chris I was looking at your website again and noticed the 2 cycle oil. A lot of us use TCW-3 2 cycle oil in our fuel, I’m wondering if you think it would be worth the extra money to use the trybodyn oil in our fuel. I know there would be benefits to using it in a 2 cycle engine but would...

I figured I would start a thread for everyone to post in for any Craigslist adds that might interest someone

https://greenville.craigslist.org/pts/d/clinton-6bt-cummins-59-turbo-diesel/6826205907.html Thought this might interest some of y’all

I picked the heater core up from @Twisted Steel Performance on Monday. He packaged it up good to where it wouldn’t move around a lot in the box. Chris is a good guy to work with and if he sees a problem with anything he’ll let you know before he does anything. The coating looks good and He got...

I need to know about how much oil y’all think I need to add to the system. A little back story. I pulled the engine last October or November to do head gaskets and check the main webs after it ran hot on me. My brother was helping me and he didn’t want to wait until I got home from work to...

http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1358726&m=wc&l=en&html=true Hope this helps somebody

I was walking around Tractor Supply today and happened to see this strainer for a pressure washer sitting on the shelf. It’s thick plastic and has 1” npt threads entering and exiting. They have bigger ones and smaller ones but I figured the 1” would be the one to try out. It has a course...

http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1358726&m=wc&l=en&html=true

http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1358726&m=wc&l=en&html=true I hope it helps someone

I like the idea of a "on the fly adjustable tune". I have a 2000 k3500 single wheel 6.5 daily driver and have a 95 k3500 6.5 duel wheel parts truck. Do y'all think it would be worth it to swap the harness and computer or just buy a kojo tune for my obd 2. I still have the asthma attach turbo...

On the engine valley side of the heads are 4 looks like 1/4" maybe 1/8" plugs in the head. One of mine sprung a leak today and I was wondering how you guys get them out. I took the top and bottom intake off and the plugs are smooth on the inside with no way of getting a Allen head or anything...