Search results

i figured it out got some ball joint spacers

im back with some more prolly dumb questions lol guys were a big help last time so i figured id try my luck again this is the lift kit https://spindle-source.com/264131555846/ heres a video of the lift https://share.icloud.com/photos/09eabVVRPsVmVpvB3lcpSUtsw

hey man, i just wanted to thank you and everyone else for helping me out!!!! the resistor was missing in the PMD i put one in and the truck fired up and ran very well. i was able to do the TDC offset procedure and the truck is running awesome with no leaks!! man 2 weeks of stress over a tiny...

will do

the first pump i bought was the wrong one, or something to do with the connectors(gray vs black) and every time i plugged it in it would push one of the pins to far down in the connector that it wouldn't make a connection and in return i got no fuel coming out of the high side of the IP

ill check the resistor in the morning i have the pmd mounted on a heatsink next to the fuse box the pmd came with the new pump

Continuity on all wires I had a guy tell me to pull it out and not use it but I will put it back on

Is that what this thing is it has a number 6 on it

i have the pmd located on a heatsink near the fuse box

so the fuel pressure is sitting around 5 psi at the IP the code i have is P1218-Injection pump calibration circuit i also have a perfectly cut block of wood on standby! lol the actual ip timing is tricky cause it fluctuates so much. the return line seems to have no flow for some reason but...

@dbrannon79 this is the new pump. the truck was running perfectly fine before i took the old pump out. i replaced it cause it was filling the valley with fuel. so the new pump was acting this way, so i put the old one back in, lined it up with the punch marks i made and it did the same thing as...

so here is the video of the clear hose. i noticed that it comes up but really dont move

Thanks!!

Awesome, thanks for the detailed reply. I’ll have a update with the clear hose shortly

i got it for dales diesel store

ohh, alldata said i should set the actual IP timing to 3.5- 3.6 then do the TDC. its a 94 motor,DS4 injection pump. 98 truck

so i replaced my injection pump. I'm new to diesels. i got the timing close 2.9-3.5. but it is running like crap i bled everything the filter, return lines, injector lines cracked them 1 by 1. the truck was running fine with the old injection pump it was just leaking fuel and filling the valley...