Search results

Thanks for the info and i guess i broke a forum rule. I don't know what a hot link is, someone explain. Sorry if i did something wrong.

My pump came without fittings?? I noticed in the on line RAPTOR manual they come with what looks to be some type of -16 AN fitting. Still doesn't help with what the thread is in the side of the pump LOL. Its not like i have a bunch of fittings to try and see which one fits. i have to order these...

OK so i bought the raptor rp 150 to install in the hummer. Over the phone i was told it took 1/2 inch fittings so i went and bought fittings. They dont fit!! So im wondering as i can't seem to get a straight answer from the vendor,, What fittings go in and out of the raptor pump?? I want to go...

This thread conviced me to buy the Raptor 150 pump. I was going to go for the FBB 5. Hopefuly my decision will get me more than 1 year on the pump.

I almost bought the frb5. I ended up going with the Rator 150gpm pump and just got it in the mail so its not installed yet. Removed non supporting vendor link to Extreme Diesel I had heard a couple complaints on the frb5 doing research and found no complaints about the raptor so i went with the...

Some things to consider. After doing my FTB mod i had found several leaks after crawling around under the truck. The nut on the fuel heater element has a rubber seal that can go bad or the nut may be loose. In my case it was just loose after the R&R so i tightened and it stopped. The other leak...

At one time someone from GM who was an ETA guy mentioned that the majority of IP's removed and sent back for testing were fine. Of course that was years ago. Now Humberview Trucks cracks the pumps when they take them off with a sledge hammer so they can never be rebuilt or even tested!! Once the...

We see these codes in the Hummer world as 1216 1217. Couple of thoughts. The dealer when seeing these will try to sell you a new IP. What is happening is the poppet on the rear of the injection pump or fuel solenoid is likely sticking due to the internals being a bit crudded up or corroded...

Sounds to me like your boost fooler is out of range. Surprised you don't have a code or 2 to report. Remove the boost fooler setup back to stock and start from there.

It is a 10 bolt 8.5

I have found some battery cables look great on the outside but inside they are green dust and will not conduct current effectively. My friends burb went through 3 before he replaced all the cables with a big 3 upgrade and that fixed it for good. The big black negative was dust!! Thing is it rang...

The revving sounds like a PMD issue. For some time now i have been trying to draw a parrellel between lower battery voltage and PMD brown outs within the logic circuit and or insuffiecient amperage to drive the fuel solenoid. It would apprear that a lot of time this happens is when you first...

Anyone have a need for a 10inch rear end repair kit. Comes with ring, pinion and bearings etc. I won it at a truck meet and have no use for it. I will post back the ratio later when i get to the shop. I am in Toronto.

Old news i know, but can someone point me in a direction where i can find out more about the details of this practice of filling the water jacket with Hydra Cement.?? Much thanks!!

I think it would be better if formed out of a special moly concrete like a dip mold.

I have not seen the article yet but i have enjoyed reading the comments here. I am a huge 6.5 fan. These days you can create your own aftermarket companies if the ones out there are not filling the niche. Folks on here could do well to start a number of operations regarding 6.5 custom stuff...

Oh and i cut the screens out of the secondary nylon filter inside the FM. I use a filter in the viewer upstream with better flow. Also in the pic is the old IP fitting I will throw a few pics of my ride in for good measure

A few more pics 1 my prepump filter 2 my makeshift IP fitting1 3 Completed ip fitting other than cleaning Pre filter again Couple shots of the pump filter install.

Turbine Doc and others had posted info on this and i had found a link for it online which got me here, and signed up. That was a month ago or something. Since, i have completed the FTB mod on my truck. I have a stock TD. My truck had a few slight differences but the basics of the mod were the...

I went through the same thing but for me it was air getting in from 2 spots at the fuel heater gasket (my fasult didn't put it tight enough) and the fuel drain hose had a hairline crack at the clamp. Everything on top looked great so i didn't find the issue till i got underneath. If the rat...