Search results

Tightening down the bolts holding the PS pump to the head. One bolt was not going in very well. Tried to back it out, got all wonky and tightened in the threads. Put the 1/2” impact on it, it come out, but not all right. A portion of it is twisted off in the head. I quit for the night, came in...

Shortened the harness to the Air Dog pump system, by about three foots. It now is all plumbed, underneath the truck, to My satisfaction. Cross over exhaust pipe with new gaskets and AARP stainless steel bolts and warshers with copious amounts of nickel anti seize. Bolted the box back down and...

Hello No.9. Welcome to the forum. You are in the right place for all the advice and guidance that You could ever need to get, and keep, Your truck on the road. If You get a chance, post in some pics of Your truck.

I no longer have ebay. I did highlite the brand and PN, done a search and went direct to the Hewitt Industries website and ordered it in direct. An option to drop the pressure from 80PSI to 30 PSI so I chose that one. I went into the amazon account but the 100 psi gauge had already shipped...

I got a thread going about transmission pressure gauge to fill a hole in a three gauge pod. It was suggested that I might be better served with a turbo drive pressure gauge, some call it back pressure. Now My curiosity has got Me down. I need this. 😹😹😹 Also suggested pre and post turbo...

I might have misled You on that last posting I instilled. It is the transmission that needs to be shifted to neutral.

The pigup the school district provides is a beat to crap 2001 ford 250 super duty. Used it to pull a trailer of leaves to the landfill. Ready to pull out of the dump spot and truck spun out on the mud. Twisted the switch to 4 Lo. Got out of the shitsuation, twisted back to 2 Hi. No go back to 2...

We like pictures. Please !

I also seen some that is dual pressure and has two install kits. I thought was exhaust pressure. Might have been just air pressure. I am wondering if the dual air pressure gauge would work if installed with the copper cooling kit ? A person could make their own copper pipe cooling kit from a...

I’ll have to check into a set of those.

What is this “ back pressure gauge “ that You speak if ?

Is the Laycock, or Laylock a british made item ?

I used to have an ebay account. 100% positive feed back on a lot of sales and purchases. My account got hacked real bad. Some kind of a bot I suspect. I would call ebay, change the PW and before I could sign in it already had changed. After three or four calls to ebay, being told it was then...

Got all of those. Secondary coolant temp gauge attached to the No. 8 cylinder. It never varies much over a couple degrees from the coolant temp sensor hooked to the ECM.

You might give that guy in Glendive a call and quiz Him about that pump. IDK if He would work on it but I do know He used to do a lot of pumps.

With enough components to hook that GV to My T-Case I’d be mighty interested in whatever I could scrounge together.

Oh yes it does. 😹😹😹😹

Wanting to fill a blank hole in a gauge pod that sits atop of the dash on My truck. Looks mighty ugly glaring back in my direction. Transmission is the 4L80E and I am wondering what the max pressure electronical gauge would not be overtaxed with pressures beyond its capabilities. I have done...

On the rivets, I always just used a large chisel and a sizable hammer. About six or eight raps and each rivet was sheared. Pin punch to knockum out.

The FTB.