Search results

I don't know the P/N for this piece, but is does this snap right into an older inner fender when switching to the K47 air box? If so, does someone have one sitting around they would like to part with? If I recall correctly, the bracket to bolt to the wheel well is totally different and doesn't...

Probably too far to use my local guy, then?:happy:

Are you near central Ohio @Manny1500HD ?

Part number could be 15678943, if so?

Has this been sold?

I didn't know it had changed. Is this it?

For those of you with the coolant overflow on the firewall and are using the K47 box, how did you route this hose?

This might further explain... If one of these adapters will work, then I can possibly tilt the battery forward enough to create space enough to fasten the adapter. Then I can attach to the top and run these batteries until they quit. At that time, then I can buy dual post and the problem goes...

I'm not ruling it out @Twisted Steel Performance . There is another part I am considering also, after all is said and done. Is there any objection to using something like these to put my dual connector on top of the battery rather than buy new batteries...

After seeing the flow rate stated by Wix, I understood better. I'm going to borrow a dual post battery from a guy with a Duramax I know to see if I can get that to work and then see if I can adapt in the K47 filter housing I have. I have a 46440 and a 46441 filter as well. I have not. Good...

There are still two cables and a bolt to connect.

Can't check the post bolt. About 1/8" to 1/4" from battery terminal to band clamp on intake tube.

Relocating the battery under the hood isn't going to happen with the big fat fiberglass hood so I am considering top post battery. Worst part is that the side post batteries in it now are under 3 years old Anyone use a drop out battery tray under the bed?

Here is what it looks like with the original filter housing. I think it's reasonable to see that it could be done. It's clean looking. The flow rate got my attention though. Flat filter (46316) = 100 CFM per WIX Large or small K47 filter (46441 or 46440) = 250 CFM per WIX

How close is the battery connection to that? Do you have a view from the top? Also, what's this?

Tires are up off the ground with these. https://www.summitracing.com/parts/pwb-620471

I saw this also. Must sit pretty flat. https://www.thetruckstop.us/forum/threads/battery-relocation.33246/#post-386272

so the indented portions would have made it too deep - that's what I suspected.

Thanks @n8in8or . What did you use for a battery tray? I see you said it was tight but didn't pick up on what was used.