Search results

I took all of the grounds loose and cleaned them and made sure that they were tight after I saw what some others had posted about the trouble that they cause with this truck. I'll get the gp and controller out tomorrow and test them. After that is working I'll try getting her started again. I...

Wow, you guys are a great help. I not very familiar with these engines, I do a lot of 7.3 and 6.0 work for people though. So I'll try to bleed the injectors to be sure that the fuel pump is opening them. What should the ohms reading be on a good glow plug?

Well I checked the fuses and found the ecm fuse blown. I replaced the fuse and jumped the aldl. I got a code 29 for the glow plug controller not working. I removed the jumper and tried to start the truck, it spins but does not start. I checked the code again and still had just the code 29. Will...

Ok, so which pins do I jump? And is there a code chart that I can print ?

Thanks for the info guys, Sorry I didn't answer sooner, but I was working out of town. ............. Ok where to start. The engine spins and once in while it hits but will not start. I have fuel through the bleeder with the key on and while cranking. I can see the ecm in the rt side of...

I have a 94 6.5l and it will start if we pull the truck, but it has no power. I tried to connect my Snap-On scanner to it and it tells me that the truck does not have a ecm except for the trans. Well this truck it a stick! So I saw all of the posts about the grounds and I took them apart and...