Search results

Hey all, I was curious what everyone has for fire extinguisher mounts that are no drill? I would prefer made in USA. Basically wanted to see what everyone has, and how you like them. I ordered a 15249408 bracket for the 06, we'll see what it is when it shows up. Not much known about it on a...

Time to check the pump harness. I have another thread on this forum ("Double check my diagnosis please, 94 K3500") and I have similar issues, and so far its looking like the pump harness, might be loose or corroded on the fuel solenoid pins. loose screws would explain it getting fuel...

what is the casting date?

condition of fuel heater and WIF sensor?

Hey all, Got a crack in the lid mating surface of my airbox on my 06, and I like the Donaldson system, so I'd like to find another OEM filter setup. Let me know what you have and how much. Thanks!

@jrsavoie see if you can find your referral code and I'll enter it when I register.

@jrsavoie, do you get any sort of kickback if I order through you? Its looking like I'll probably just go the Preferred Customer route unless there is any beneficial kickback to anyone. I am sucker for rewards programs, so the points via the Preferred customer route is appealing... :)

@Burning oil and @quadstar87 either of you a dealer?

Is it recommended to pay for the customer fee first, then wait for them to e-mail offers?

I dont plan on it. :) I dont care for their business structure, the whole tiered thing bugs me.

I'd definitely be checking flywheel part numbers for a 97 and a 84, I am curious if the crank face to bellhousing mounting face measurements differ, and you might need a different flywheel. Definitely check, because I never have. I am just curious if there was a change between the 1 piece and...

Hey all, I need to get some more Amsoil power steering fluid, and wanted to support anyone here that is a dealer. Also, does becoming a preferred customer get me a discount in addition to the dealers discount? If I become a preferred customer on the AMsoil site, can I give a referral that...

OK, wrote down some actual values versus going off my Pendleton compromised mind (last nights New Years Eve party was good! :) ) Staring into the PMD connector, tab up, left to right. Left two pins being the Fuel Solenoid wires. 95 K2500, runs great, using it as the "control" 95 K3500 is the...

OK, tested some more, probably going to pull the intake to inspect wiring, putting the multimeter across the two pins I get a relatively low reading (0.9 on the 200K scale) but going from battery ground to pin i get like 30 on the 200K scale. would this be more likely a wiring issue? I am...

OK, pinout helps immensely, thanks guys! I checked with the multi-meter set on the 200K Ohm scale, and got a reading of 30 or 300 on the main fuel solenoid (left two pins on end, red and black), and zero on a known running pickup Pretty safe to say main fuel solenoid is shot and IP needs...

OK, cleaned most of the grounds today, got the one unhooked from the bellhousing bolt and back up on the intake where it belongs. Got the frame grounds. need to clean the firewall ground. Changed fuel filter, looked OK. last ditch screen gone, put a good used one in. Possible the IP inlet...

Nice find! On your tach not matching the supposed ratio, double check the glovebox codes to see if axle tag and original build match, and if so, check alternator pulley. if it has gasser pulley, that could be why its off. On the diff oil, 80w90 is supposedly 3,000 mile change intervals, 75w140...

OK, back at it since farming is about done for the year. I put a new positive cable (pass batt to starter) in, that helped a bunch. along with better batteries. Now I am getting fuel to the injectors, seems to go in cycles, some times it smokes good, other times not so much. Spraying a little...

sorry, yes, the metering solenoid. Not shutoff. The burning up due to incorrect depth might explain his current situation, lol. I assume anyone that is eating PMDs could be caused by a improper depth FSO?

Hey all, Has anyone successfully changed a fuel solenoid on a DS4? Got a buddy that has a bad one, ohmed out bad. Pump ran awesome prior.