Search results

I've run into that before. My solution was to give up. Lol. That was on Android phones

Is Leroy's oil cooler 3/8 npt? I thought it was 1/2" npt.

Are the fiffings coming out of the bock and oil cooler different between Leroy's kit ad the Hummer?

Don't cut and splice. If you make your own relay harness, get the connectors and make it plug and play, like Leroy’s. I posted the numbers for the connectors, years ago.

If ever have to take the adapter off the 1994, I might remember to look into that. Leroy’s lines seem to make the oil filter even harder to get to

My problem with doing it your way is, I don't know exactly which fittings tobuy and I've never seen it posted.

So why aren't we using Hummer engine oil cooler hoses? Or at least the parts that go in the block?

Are you able to do that with a GMT400 4x4? On the 2wd I used to use the 2 quart filter. Will: I think (could be wrong) the part on the 90° can be removed and installed into the block. Just swap these two: I was going to suggest trying that. I thought I remembered doing that, just a few short...

What are you using to lube the cylinders? Are you turning the engine over some before reinstalling the glow plugs?

Great. No more wondering where to send a set

He should sell on Amazon

Cereal rye, also known as winter rye, is a popular choice for a garden cover crop due to its ability to rapidly establish a dense ground cover, suppress weeds, prevent soil erosion, and scavenge excess nutrients from the soil, particularly nitrogen, throughout the winter months, making it a...

I really wish a vendor would sell fuel gauge kit. One vendor told me that everything was available, nomoney in a kit. The same is true of the engine oil cooler kits, but a lot of people buy those.

You might be just as well to get set to install a permanent fuel pressure gauge. You can always temporary it for now.

Send them someplace to be tested and balanced

Delco very well could be Chinese. I don't have a guess on that. If you search "injectors Michigan", you should find info on the guy I used to use. He did an excellent job. I had my pops set to 2200 or maybe 2300 psi. The pop pressure you is up to you. I mailed mine off to a place in...

Just guessing the IP is good. Might want to try searching their recent reviews on their rebuilt IPs. Guessing they're still selling quality rebuilt units

The injectors were bad after only 10,000 miles?

Could you share the details on your rebuilder? I haven't dealt with the guy in Michigan in so long. I'm not even sure they're still there

I trust Quadstar, but you never know. If it was built their previous rebuilder, I would trust it 100%. He quit fuel injection a while back and I believe he might bean emt now