Search results

Or set multimeter mode on the beeper

Turn off the ignition. measure the resistance between the body and the light blue. when all connectors are connected.

Is this when all connectors are connected?

You can take a long needle from the syringe to get to the desired contact on the TCM

Do you have the pan removed? you can measure directly on the solenoids.

Connect the connectors and measure again

You need to disassemble the TCM and take a photo of the board on both sides.

yes on Red. And check pins 1 and 5 on the gray connector.

Is there voltage on the other connector pins 22, 24, 32?

Strange, it should always be on pin 3. not 2

Is there voltage on these contacts?

And you still have error P0748?

To measure the current you need to move the red probe to contact “A”. Mode switch to position "A".

I've already moved towards you.

Ideal 61-337 will be enough.

The first two pictures cannot measure current.

AstroAI Digital Multimeter TRMS 4000 Counts with DC AC voltmeter and Auto-Ranging Fast Accurately Measures Voltage, Current, Resistance, Capacitance, Temperature, Continuity, Frequency and Duty-Cycle. https://a.co/d/86wp6nR 1000V 20A Multimeter Test Leads Probes Banana Plug, Digital Multimeter...

And order other probes right away. Look what's on AliExpress! 1 Pair Silicone Universal Multimeter Test Leads Replaceable Multimeter Probe Test Wire Probe With Alligator Clip 1000V 20A for 792,60 ₽ https://sl.aliexpress.ru/p?key=qbcbUCd

Although for $18 it's better than that green one.

Better Fluke 87 or APPA103.