Search results

10 ft, for long term I'm going to add 2x6 to each truss, then 2x6 between them for something to nail to, I don't want saging 10yrs from now...

FYI, GEP has sold ALL P400 parts they had, no more anything p related. Not confirmed but it appears the 6.x may be next to get axed...

Yea, 2x6 on 16" , and I'll have 2 6x6 post's somewhere.

Would you believe someone sent me a message yesterday, says the company is doing r&d with those pertaining to the 6.5 now.... Seems it would be a hard thing to prove with a idi motor.

Thanks Les, I'll see what mine will do. It's a older boshtic...

I have a good pneumatic framing nail gun, I will be needing a nail gun for the sheeting, the nails used in the framing gun are too long, any recommendations?

The concrete will be poured/pumped Tuesday. I have decided to go with plywood for the walls and ceiling once I get that far along.

frp ?

Another factor was the weight for different products, osb is heavy so my ceiling rafters would need to be beefy to span 30' , I don't want any post inside, the PVC stuff is lighter so I could go 2' on ceiling rafters. This stuff is slick and shiny so it will spread light well.

I'm starting to build a new shop, 30x30 with 12' ceilings. This is inside a pole building. It won't be insulated on a/c, if I need heat I'll install a wood stove. I'll be using "trusscore" wall and ceiling boards. https://trusscore.com/products/wall-and-ceilingboard.html Anyone use this...

I'm starting to build a new shop, 30x30 with 12' ceilings. This is inside a pole building. It won't be insulated no a/c, if I need heat I'll install a wood stove. I'll be using "trusscore" wall and ceiling boards. https://trusscore.com/products/wall-and-ceilingboard.html Anyone use this...

If I'm installing powder coated stuff I use a thin SS washer so the fasteners don't twist the coating causing it to chip.

maybe look on rockauto.com and compare them with what you have on your truck...

Are you sure it hasn't come apart and the bearing is still on the shaft?

rockauto shows a bunch of them...

A air leak in the fuel system is possible, a seal on the pump could be suspect, not sucking air all the time sort of thing.

LOL 😆

Well if ya can't figure out the part about removing the oil pan ya shouldn't be doing the job... It is a simple job ..

Well that's how a oil pump is replaced..... Did I miss something?